FloraWorldPlanting Systems
VerifiedThis entry contains 1 pending parameter items, each flagged within its section.

Irrigation and fertigation: from water quality to drip

Test the water, design the system, then discuss the recipe

An irrigation system does more than supply water: it must distribute evenly, keep nutrient concentration controllable and allow salt leaching. Alkalinity, sodium, chloride and boron in the water often decide crop performance earlier than the fertilizer recipe does.

Applicability

Regions
General (cross-region)East AsiaEuropeNorth America
Climates
TemperateSubtropicalArid / semi-aridControlled environment
Growing methods
GreenhouseContainer growingSoilless cultureField production

Water testing precedes design

ParameterImpact
EC and total saltsSets dilution and leaching requirements
Alkalinity (bicarbonate)Raises root-zone pH over time, reducing iron and manganese availability
Sodium and chlorideExcess causes leaf-margin burn and root damage
BoronNarrow window; slight excess can be toxic

Testing frequency and thresholds depend on source stability and crop sensitivity.

Key components of a drip system

  • Filtration: prevents emitter clogging; sand plus disc/screen filters are often combined
  • Stock tanks and injectors: proportioned injection without concentration spikes
  • Pressure-compensating emitters keep flow uniform along long rows
  • Zone valves: independent control by cultivar, batch and water demand

Fertigation and leaching

Measure and log EC and pH for each irrigation. When salts accumulate in the root zone, leach deliberately instead of waiting for leaf-margin burn. Leaching fraction and frequency depend on water quality, media and evapotranspiration.

  • Calibrate EC/pH probes and injectors regularly; sensor drift is more common than recipe errors
  • Log volume, EC, pH and drainage EC per zone for traceability
  • Application volume, leaching fraction and nutrient concentration depend on local water and crop stagepending

Common system-level failures

  • Clogged emitters cause local drought that is often misread as disease
  • Different cultivars on one zone cannot be watered to their own needs
  • Testing only the source water while ignoring salt build-up in the root zone
  • Uncalibrated injectors make actual EC diverge from the setpoint

Related crops

Read next

Sources

These public references were used for principles, conditions and general operating logic. Specific values still require local trials and official requirements.

  • Penn State Extension · Floriculture

    Greenhouse floriculture, media and nutrition management

    extension.psu.edu
  • 《中国农业百科全书 · 观赏园艺卷》

    Production practice, propagation and postharvest basics

  • University of California Statewide IPM Program

    Monitoring, thresholds and integrated pest management

    ipm.ucanr.edu

Last compiled:2026-11-15

Content is for reference only and is not agronomic advice, crop-protection diagnosis or spray advice. Registration, residue and quarantine matters must follow the official channel of the relevant country or region.